Basler imaFlex CXP-12 Penta

imaFlex CXP-12 Penta is a programmable CoaXPress 2.0 frame grabber that allows a full bandwidth connection of up to five CXP-12 cameras.

Graphical FPGA programming with VisualApplets offers application-specific real-time processing of image data on the frame grabber.

Services for individual customization of the frame grabber
microDisplayX configuration software
Up to 62,5 Gbps data bandwidth
Power over CoaXPress
Robust multi-frame grabber and multi-camera support with versatile synchronization options
With five CXP-12 channels best suited for typical configurations in 3D AOI inspection
Flexible fields of application thanks to large RAM and extensive GPIO

Net list price	On request
Delivery time	Standardapprox. 3 weeks

Order Number	2200001177
Type	Frame grabber
Product Series	imaFlex Programmable Frame Grabber
Product Type	Processing

Processor	Xilinx Ultrascale+ KU3P
On-Board Memory	2.5 GByte DDR4-RAM
I/O Module Interfaces (Trigger and Sync)	Trigger/GPIO-IF (Opto Trigger, TTL Trigger)

Standard	CoaXPress 2.0/2.1
Interface	CoaXPress (CXP-12)
Configurations	CXP-12; up to 5 cameras
Connectors	5 x Micro-BNC/HD-BNC
Cable Length	11 - 40 meters
Power output	17W/24V DC regulated power per CXP connector
Camera Support	area scan camera line scan camera
Sensor Type	CFA sensor (Bayer) Grayscale sensor RGB sensor
Sensor Resolution	32k*64k (area scan sensor), 16k (line scan sensor)
Bit Depth	8-16-bit (grayscale) 24-48-bit (color)
Data Bandwidth	5 x 12.5 Gbit/s (1,560 MB/s)
Data Bandwidth (p.port; Total)	12.5 Gbps; 62.5 Gbps
No. of Ports	5
Test Environment	Camera Simulator

PC Bus Interface	PCIe 3.0 x8
PC Bus Interface Performance	7876 MB/s (theoretical), 6520 MB/s (typical/max.)

Suitable Products

Trigger Board GPIO Interfaces	Box connector (34-pin)
On-board GPIO interface	One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)
On-board Front GPIO Interface	3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL output signals; configurable by software GPIOTool; max. voltage of the input signals between 4,5V and 25V
GPIO Synchronisation and Control	Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization
GPIO Interface Summary	12 in/12 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent)

Dimensions	PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height
Weight	274 g
Power Consumption / Power Source	Typ. 13,4W@12V, excluding camera and I/O power output
Operating Temperature	0 - 50 °C (32 - 122 °F)
Storage Temperature	-50 - 80 °C (-58 °F - 176 °F)
Relative Humidity (operating, storage)	5 - 90 % non-condensing (operating), 0 - 95 % (storage)
MTBF	48.440 h

Software Drivers	Linux 64-Bit Windows 11 / 10 (64-Bit)
Software Tools	Device Drivers Documentation microDiagnostics (Analysis and service tool) microDisplay X (Acquisition control and viewer) SDK
Software API	.net interface Framegrabber SDK GenTL
FPGA Programming	VisualApplets
MV Software Compatibility	GenTL-based MV-Software