Basler microEnable 5 marathon deepVCL

Name: microEnable 5 marathon deepVCL
SKU: 2200000608
Price: 3159 EUR
Availability: PreOrder

microEnable 5 marathon deepVCL is a PCIe image processing device that allows the connection of two cameras of any Camera Link standard specification.

microEnable 5 marathon deepVCL is a high-speed image processing solution for Deep Learning applications by VisualApplets.

Quantity

Net list price	€3,159.00
Delivery time	On request

Processor	Xilinx Kintex7 XC7K410T
On-Board Memory	2 GByte DDR3-RAM
I/O Module Interfaces (Trigger and Sync)	onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs
Power via Interface (p. port)	PoCL (4W/12V per cable, Safe Power)

Standard	Camera Link 2.0
Interface	Camera Link
Configurations	CL-base CL-deca (80bit) CL-dual base CL-full CL-medium
Connectors	2 x SDR/HDR26 (miniCL)
Cable Length	0 - 10 meters
Power output	PoCL SafePower, 4W/12V per cable
Camera Support	area scan camera line scan camera
Sensor Type	CFA sensor (Bayer) Grayscale sensor RGB sensor
Sensor Resolution	64k*64k (area scan sensor, VisualApplets), 64k (line scan sensor, VisualApplets)
Bit Depth	8-16-bit (grayscale) 24-48-bit (color)
Data Bandwidth	1 x 6.8 Gbit/s (850 MB/s)
Data Bandwidth (p.port; Total)	6.8 Gbps; 6.8 Gbps (850 MB/s)
No. of Ports	2
Test Environment	Camera Simulator

PC Bus Interface	PCIe 2.1 x4, DMA1800
PC Bus Interface Performance	up to 1800 MB/s (sustainable)

Trigger Board GPIO Interfaces	Box connector (34-pin)
On-board GPIO interface	One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)
On-board Front GPIO Interface	2 TTL outputs, up to 20 MHz frequency One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input
GPIO Synchronisation and Control	Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization
GPIO Interface Summary	4 in/2 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent) 8 in/8 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent)

Dimensions	PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height
Weight	165 g
Power Consumption / Power Source	12 V, 1.4 A (actual values depend on processing)
Operating Temperature	50° (0 LFM), 60° (100 LFM) FPGA operating temperature: 0°C to 85°C, * LFM = Linear Feet per Minute, unit for measuring airflow velocity
Storage Temperature	-50 - 80 °C (-58 °F - 176 °F)
Relative Humidity (operating, storage)	5 - 90 % non-condensing (operating), 0 - 95 % (storage)
MTBF	pending

Software Drivers	Linux 64-Bit Windows 11 / 10 (32-Bit) Windows 11 / 10 (64-Bit)
Software Tools	Device Drivers Documentation microDiagnostics (Analysis and service tool) microDisplay (Acquisition control and viewer) SDK
Software API	.net interface Framegrabber SDK
FPGA Programming	VisualApplets
MV Software Compatibility	Halcon others on request