onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs
經由介面供電(每連接埠)
PoCXP (13W/24V per cable, Safe Power)
Camera Interface
標準
CoaXPress 1.0/1.1
介面
CoaXPress (CXP-6)
配置
CXP1-6; up to 4 cameras
連接器
4 x DIN 1.0/2.3
線材長度
11 - 40 meters
功率輸出
13W/24V per cable
Power over CXP
SafePower
相機支援
area scan camera
line scan camera
感光元件類型
CFA sensor (Bayer)
Grayscale sensor
RGB sensor
感光元件解析度
16k (-32k)*65k (area scan sensor, depends on applet),16k - 32k (line scan sensor, depends on applet)
位元度
8-16-bit (grayscale)
24-48-bit (color)
資料頻寬
4 x 6.25 Gbit/s (780 MB/s)
資料頻寬(每連接埠;總數)
6.25 Gbps; 25 Gbps
連接埠數量
4
測試環境
Camera Simulator
主機電腦介面
電腦匯流排介面
PCIe 2.1 x4, DMA1800
電腦匯流排介面性能
up to 1800 MB/s (sustainable)
控制與通用型 I/O
觸發板 GPIO 介面
Box connector (34-pin)
機載 GPIO 介面
One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)
機載前端 GPIO 介面
2 TTL outputs, up to 20 MHz frequency
One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input
GPIO 同步與控制
Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization
GPIO 介面彙總
4 in/2 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent)
8 in/8 out (max.), TTL or opto-coupled; differential or single-ended signals (configuration dependent)
處理功能
基本功能
Image Selector
Invert
LUT
Mirroring
Offset/Gain/Gamma correction
ROI
White Balance
物理及環境資訊
尺寸
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height
重量
168 g
消耗功率/電源
typ. 1.175 A @ 12V (actual values depend on image pre-processing), maximum load: 3.35 A (single supply over 4-pin power connector)
作業溫度
50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C, * LFM = Linear Feet per Minute, unit for measuring airflow velocity